Ventilation; Air Direction; How To Attach Drain Pan - HAMPTON BAY HBLG1800H Owner's Manual

Additional controls and important information.
The ventilation lever must be in the CLOSE position in order to maintain the best cooling _nditions.
When fresh air is necessary' in the room, set the ventilation lever to the OPEN position.
The damper is open_ and room air is drawn out.
:Before using the ventilation feature,
position the lever, as shown. First:, pull down
part @ to horizontal line with part ®.
i
I
I
i
Pa_
Air Direction
The direction of air can be controlled wherever you want to
cool by adjusting the horizontal louver and the vertical
louver..
. HORIZONTAL AIR-DIRECTION CONTROL
To control horizontal direction of air flow, set to the ON
position the air-swing switch and the air flow will be swept
horizontally by the automatic air-swing system.
If you want to stop the sir flow from moving, switch off the
air swing switch at the desired position of the vane.
. VERTICAL AIR- TION CONTROL
The vertical air direction is adjusted by moving the
horizontal louver.
How to Attach Drain Pan
The air conditioner employs a proper drain method whereby the con@nsed water (moisture removed from
the air} is drained to the outside.
In very humid weather, (and for reverse cycle mo_ls in the reverse mode) excessive con_nsate water
removed from the air may cause some water to collect. To remove this excess water you can install the
drain p_ as detail_ below.
1. Take the drain pan which is located in the air di_hage. CABINET
2. Remove the hole rubber from the base-pan (for some models). .............
3. Install the drain pan to the right comer of the cabinet with 4 (or 2) "*
screws.
4. Connect the drain hose of 3/5"insi_ diameter to the outlet locked PAN
at the _ttom of the drain p_.You _n purchase the drain hose or
tubing locally to sa_sfy your particular needs. (Drain hose is not
supplied).
DRAIN HOSE