Advertisement
MANUALLY
L ZGHTZNG
THE BURNERS
WZTH
THE HATCH
HOLDER
1.
Open the lid.
2.
Ensure all burners
are in the "OFF" position.
3.
Slowly turn on the gas at the LP cylinder
valve or NG gas if it is not already
on.
4.
Place a match in the match light stick. This is
located
inside the center
cabinet
door.
5.
Use the stick to slide the lit match through
the cooking
grates and the front
of the heat
diffuser
to the burner
you wish to light.
6.
Press and turn the burner
control
knob to
"Hi", Continue
to push in and hold up to 5
seconds or until the burner
lights.
If the burner
does not light within
5 seconds,
turn the burner
control
knob to
"OFF". Wait 5 minutes
for gas to clear, and try
again.
8.
When lit, turn the control
knob to the desired
heat setting.
MANUALLY
LIGHTING
THE
SIDE
BURNER,
BACK
BURNER,
or SEARING
BURNER
1.
Open the grill lid or side burner
cover.
2.
Ensure the control
knobs are in the "OFF"
position
as well as any main burner
not in
use,
3.
Slowly
turn on the gas if it is not already
on.
4.
Strike
the match,
and place near the top
of the burner.
5.
Turn the control
knob to "Hi"
6,
If the burner
does not light within
5
seconds,
turn the burner
control
knob to
"OFF". Wait 5 minutes
for the gas to clear,
and try again.
7.
When lit, turn the control
knob to its
desired
setting.
8,
Continue
to press in and hold the
rotisserie
or searing
burner
control
knob
for 5 to 7 seconds once lit to activate
the
safety
flame sensor.
Failure to do so will
cause gas to be shut off to the back
burner
and the burner will go out,
1.
Do not use charcoal
briquettes,
lava rock,
or any type of ceramic
product
in this grill.
2.
Do not put a barbecue
cover or other
flammable
material
in the storage area of
this grill.
Never
lean over the grill cooking area while
lighting
your gas grill. Keep your face and body
a safe distance
(at least 18 inches)
from the
lighting
hole and burners
when lighting
your
grill with a match.
20
Advertisement
