Advertisement
install
Towel
Bar Handle
and Utensil
Hooks
[]
Remove 2 Philips head screws from the left side of the Countertop
Frame.
Use them to attach
a
Towel Bar Handle to the left side of the Countertop
Frame.
[]
Remove 2 Philips head screws from the right
side of the Countertop
Frame.
Slide 3 Utensil
Hooks
onto the second Towel Bar Handle and use the screws to attach it to the right side of the Countertop
Frame.
Place LP Cylinder
into the Cabinet
(LP Model
Only)
[]
Unlock
cylinder
tray by turning
the locking clip located on the front left corner. Pull the cylinder
tray
out from the cabinet. Place the LP cylinder down into the tank support
hole. Ensure the valve faces
towards
the left. Raise the LP cylinder
support
ring and unhook
as shown as you push the cylinder
tray back into the cabinet, Lock the cylinder tray in place by turning
the locking clip, and lower the LP
cylinder support
ring over the top of the LP cylinder. Wrap around
the neck of the cylinder and
re-hook
to secure the LP cylinder in place,
Do Not Hook Up the LP Cylinder
to the Regulator
Assembly
at this time,
1!
Advertisement
