Advertisement
I_"t 4'__1_I D][or__l:| 4n nl _ _"i II :| I_q lln (o] _[_
Grill Lighting
Instructions
Main
Burner
Lighting
1.
Before each use, check all hoses for cracks,
nicks,
cuts, or abrasions.
If a hose is
damaged
in any way, do not use your grill
before replacing
the hose with an authorized
part from the Parts List. Also make sure all
gas supply connections
are securely
tightened.
2.
Familiarize
yourself
with the Safety and Use
and Care instructions
in this manual.
Do not
smoke while lighting
the grill or checking
gas
supply connections.
3.
Be sure the LP gas tank has gas.
4.
Open the grill lid.
Side Burner
Searing
Burner
Rotisserie
Burner
Main Burner
Side Burner,
Rotisserie
Burner,
and
Searing
Burner
Lighting
Instructions
Failure to replace a faulty
hose, secure gas
supply
connections,
or to open the lid before
proceeding
to the Lighting
Procedures
could
result
in a fire or explosion
that
could cause
serious
bodily injury,
death,
or property
damage.
Set control
knobs to OFF and open the LP
gas tank
valve SLOWLY or turn
on the NG
gas.
O
Low
6.
Push and turn any control
knob to Hi
7,
8,
O
Low
Once one burner
is lit, the adjacent
burner
can be lit by turning
its control
knob to Hi.
When lit, turn the control
knob to its desired
setting.
1.
Follow steps 1 through
4 of the Grill Lighting
Instructions.
2.
Open the grill lid or side burner
cover.
3.
Set control
knobs to OFF and open the LP
gas tank valve SLOWLY or turn on the NG
gas.
4.
Push and turn the appropriate
burner control
knob to "Hi".
Continue
to press in and hold the rotisserie
or searing
burner
control
knob for 5 to 7
seconds once lit to activate
the safety
flame
sensor.
Failure to do so will cause gas to be
shut off to the back burner
and the burner
will go out.
6,
If the burner does not light within
5 seconds,
turn the burner
control
knob to "Off".
Wait 5
minutes
for the gas to clear, and repeat the
above procedure.
]9
Advertisement
