Start; Rapid Advance - Electrolux Wascator W100 Service Manual

10 9003 4
12
Type Edition
Page

Start

When a program is completed, the machine stops at program stage 52 and
the door can be opened.
The door must be closed for the machine to start. It is only when the door is
closed that point B receives voltage (see section on "Safety lock and power
supply"). When the START button is pressed to start a new program, the
coil for timer (5) rapid advance receives voltage since row 34 (3) is closed
at stages 52-53. At stage 54 the timer stops until the START button is
released. The timer then rapid advances to stage 1 (row 33 (4) is cloced at
stage 54) and the wash program begins. This design prevents accidental
excess rapid advance of the timer when starting.

Rapid advance

By holding down the START button during program operation, the timer can
be rapid advanced past different wash phases. It works like this:
Row 34 (3) is closed between stages 1-41. One can rapid advance past
these stages with a single push of a button. When the timer reaches stage
42 the START button must be released. This causes the timer to advance
to stage 43 since row 33 (4) is closed at stage 42. It is then possible to
easily rapid advance exactly to the final spin.
If desired, the timer can be rapid advanced up to and including stage 46 by
holding the START button down.
Sequence diagram
Pre wash Förtvätt
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
33 Rapid advance 1/Start
34 Rapid advance Start
12. Function Sequences
Cool
Main wash Huvudtvätt Nedkyln.
down
Rinse 4
4:e sköljn.
Rinse
Rinse
2:a 3:e
Skölj-
Stop
sköljn. sköljn.
3
2 stopp
Service
Manual
Drain/ Tumling
Avlopp/
Extract Spin down
Centrif.
1429