Materials And Basic Tools Needed - Kenmore 153.331350 Use & Care Manual

MATERIALS NEEDED
To simplify the installation, Sears has available the installation parts shown below. You may or may not need all of these materials,
depending on your type of installation.
EXPANSION TANKS FOR
THERMAL EXPANSION
CONDITIONS AVAILABLE
IN 2 GALLONS
(7.6 LITERS) AND
5 GALLONS (18.9 LITERS)
CAPACITY THROUGH
LOCAL SEARS STORE
OR SERVICE CENTER.
WATER HEATER INSTALLATION KIT
WITH FLEXIBLE CONNECTORS FOR 3/4"
(t9.05 ram) COPPER PLUMBING AND FLEXIBLE
GAS CONNECTOR WITH FITTINGS.
METAL DRAIN PANS AVAILABLE IN THE
FOLLOWING SIZES:
• 20" (508 ram) DIAMETER FOR WATER
HEATERS HAVING A DIAMETER OF
18" (457 ram) OR LESS.
• 24" (610ram) DIAMETER FOR WATER
HEATERS HAVING A DIAMETER 22"
(559 ram) OR LESS.
BASIC TOOLS
You may or may not need all these tools, depending on your
type of installation. These tools can be purchased at your local
Sears Store.
• Pipe Wrenches (2) 14" (356 mm)
• Screwdriver
• Tin Snips
• 6' (1.82 m) Tape or Folding Ruler
• Garden Hose
• Drill
• Pipe Dope or Teflon ® Tape DRILL
SLOT-HEAD SCREWDRIVER
TIN SNIPS
PHILLIPS SCREWDRIVER
ROLL OF TEFLON ® (SQUEEZE TUBE)
TAPE (USE ONLY ON USE FOR WATER AND GAS
WATER CONNECTIONS) CONNECTIONS
GARDEN HOSE 6 FOOT TAPE PIPE WRENCH
ADDITIONAL TOOLS NEEDED
WHEN SWEAT SOLDERING
Tubing Cutters or Hacksaw
Propane Torch
Soft Solder
Solder Flux
Emery Cloth
Wire Brushes
TUBING CUTTER
HACKSAW
3/4" (q9 mm)WIRE BRUSH
1/2" (13 ram) WIRE BRUSH
ROLL OF LEAD-FREE
SOFTSOLDER
PROPANE
TORCH
ROLLOF
EMERY CLOTH
B
SOLDER
FLUX
11