Ground Wire; Pan Head Screw A Screw B M4 X; Toothed Washer - Furuno RP-250 Operator's Manual

9. INSTALLATION OF VIDEO PLOTTER KIT
c) Release hand from stopper.
5. Fasten the M-card case to the right arm cover as follows:
a) Fasten the ground wire with an M4 x 8 screw and toothed washer (supplied)
as shown below.
b) Fasten the arm cover to the M-card case with three M4 x 8 screws
(supplied).
Right Arm Cover
Pan Head Screw B
M4 x 8, 3 pcs.
Right Arm Cover
6. Unfasten the front panel from the display pedestal.
7. Pass the connector from the card assy. through the hole in the display
pedestal.
50
Pan Head Screw B
M4 x 8
FRONT
Fastening the M-card assy. to the right arm cover
Release stopper;
stay is fixed.
Stay fixed

Ground Wire

Toothed Washer

M4
M-Card Assy.