Table of Contents
Advertisement
5. Press any menu key to close the menu.
Note 1: LAND DENSITY fills (ON) or hollows (OFF) land on an electronic chart.
Land will be hollow when wrong card or wrong scale is used,
regardless of LAND DENSITY setting.
Note 2: OWN SHIP PLOT functions as follows:
OFF: Own track is neither plotted nor recorded.
SEPARATE: Own track is neither plotted nor recorded when RECORD
OWN SHIP PLOT of OWN SHIP, TARGET PLOT menu is OFF own
ship plotting.
CONTINUE: Own track is plotted but not recorded when RECORD
OWN SHIP PLOT of OWN SHIP, TARGET PLOT menu is OFF own
ship plotting.
1.6.2
Hiding/Showing nav data
You may choose what navigation data to display on the video plotter display as
follows:
1. Press the [NAV MENU] and [1] keys to display the NAV INFORMATION 1
menu.
2. Press appropriate numeric key to choose both item and option. Press the
[ENTER] key to register selection.
Note 1: Item 2 chooses source of position data as below.
Note 2: When dead reckoning navigation is used on the IMO type radar (G
[NAV INFORMATION(1)]
1 [VIDEO PLOTTER(1)]
2 SELECT NAVAID
GPS+LC/DEAD RECKONING
/AIS
3 OWN SHIP POSN
OFF/ L/L
4 POSN
00°00.000 N/S
000°00.000 E/W
5 +CURSOR DATA
OFF/L/L
6 WPT DATA
OFF/REL/TRUE
7 [NAV LINE]
8 [WAY POINT]
9 WIND DATA
ON/OFF
0 [NAV INFORMATION(2)]
NAV INFORMATION 1 menu
GPS+LC: Own ship position data fed from GPS or Loran C
navigator.
DEAD RECKONING: Position data entered at item 4 (POSN) is
used as starting point for dead reckoning.
AIS: Own ship position data fed from AIS transponder.
mode), the AIS feature is automatically turned off, no AIS symbols
are displayed, and the menu item "AIS OFF/ON" is not shown on
the AIS1 menu.
1. OPERATIONAL OVERVIEW
7
Advertisement
Table of Contents
