Recording, Replaying Data; Formatting Memory Cards - Furuno RP-250 Operator's Manual

5

RECORDING, REPLAYING DATA

5.1

Formatting Memory Cards

Before you can use a memory card (RAM card) with the RP-250, the card must
be formatted. Formatting prepares the recording surface of the card for use with
the system. The RAM card comes in three types shown below.
Note: You may format previously used memory cards; however, all data stored
on the card will be erased.
1. Insert a new memory card in the lower slot and press the [NAV MENU] and
[6] keys to choose CARD.
2. If RECORD is not in reverse video, press the [6] key again.
3. Press the [ENTER] key.
4. Press the [0] key twice to choose YES.
5. Press the [ENTER] key.
6. Press the [NAV MENU] key to close the menu.
Type
00RAM01MC-003
00RAM256C-001
00RAM512C-002
[RECORD]
1 [VIDEO PLOTTER(1)]
2 OWN SHIP PLOT
T
3 TARGET PLOT
A
4 MARK
M
5
6
7
8
9
0 FORMAT
NO/YES
RECORD menu
Code No.
00432818000
00432107000
00432223000
25