Furuno RP-250 Operator's Manual page 14

1. OPERATIONAL OVERVIEW
For manual input of position (item 4), do the following:
a) Press the [4] key.
b) Enter latitude in six digits with the numeric keys.
c) Press the [ENTER] key. (To change coordinate, press the [4] key and
d) Enter longitude in eight digits.
e) Press the [ENTER] key. (To change coordinate, press the [4] key and
3. Press the [0] key to go to next page, the NAV INFORMATION 2 menu.
Choose options as you did on the NAV INFORMATION 1 menu.
1 [NAV INFORMATION(1)]
2 WIND GRAPH
OFF/ON
3 WIND UNIT
m/s/KT
4 CURRENT DATA
OFF/ON
5 CURRENT GRAPH
OFF/ON
6 DEPTH DATA
OFF/ON
7 DEPTH GRAPH
OFF/ON
8 DEPTH SCALE
10/20/50/100/200/500
9 DEPTH UNIT*
m/ft
0 [NAV INFORMATION(3)]
4. Press the [0] key to display the NAV INFORMATION 3 menu.
1 [NAV INFORMATION(2)]
2 WATER TEMPERATURE*
OFF/ON
3 DATE
OFF/UTC/LOCAL ±00.00H
4 USED WPL#
NAV LINE/WP
5
6
7
8
9
0 [AIS(1)]
5. To choose time system, press the [3] key several times to choose OFF, UTC
or LOCAL. To use local time, select LOCAL, press [ENTER] twice, and enter
time difference between it and UTC time.
6. Press the [ENTER] key.
7. Press the [NAV MENU] key to close the menu.
8
then press the [ENTER] key).
then press the [ENTER] key).
[NAV INFORMATION(2)]
NAV INFORMATION 2 menu
[NAV INFORMATION(3)]
NAV INFORMATION 3 menu
*= R, G type fishing
mode
*= R, G type fishing
mode
# = USED WPL not shown on G-type
radar.