Table of Contents
Advertisement
9. INSTALLATION OF VIDEO PLOTTER KIT
1. Remove the right and left arm covers from the control head.
2. Unfasten bolts (M10, 2 pcs.)hidden by arm covers to separate the display
unit from the processor unit.
3. Pull the handle on the underside of the control head to draw the display unit
forward until you hear a click.
Note: Step 4 should be performed with two persons.
48
Right and left
arm covers
Pan Head Screw B
M4 x 10, 2 pcs.
Control head
Display unit
Control Head
PULL FORWARD
Advertisement
Table of Contents
