Refrigerator Care; Cleaning - Kenmore 106.5478 Use & Care Manual

Style 2: • Clean the parts as instructed in the "Cleaning" section.
A .......
A. Chi/led door bin eontro/
Slide the control to the left to reduce the flow of cold air to
the bin and make it less cold.
Slide the control to the right to increase the flow of cold air
to the bin and make it colder.
To Remove and Replace the Bin:
1. Remove the bin by lifting it and pulling it straight out.
2. Replace the bin by sliding it in above the desired supports and
pushing it down until it stops.
I
To Remove and Replace the Bin Parts:
1. Press either release button to open the tilt-out portion of the bin.
A
A. Release buttons
2.
To remove the tilt-out portion of the bin, press in on the curved
levers on each side of the bin. Pull up and out.
NOTES:
• The bin cannot be removed if it is tilted out all the way. Tilt
it only part of the way before pressing the curved levers to
remove it.
A. Curved/ever
3. Reinstall the tilt-out portion of the bin. Be sure it is properly
seated in the bottom of the bin before inserting the curved
levers into position.
4. Replace the interior parts of the bin.
C
A. Strainer basket
B. Dividers
C, Strainer mat
REFRIGERATOR CARE
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
Both the refrigerator and freezer sections defrost automatically.
However, clean both compartments about once a month to avoid
buildup of odors. Wipe up spills immediately.
To Clean Your Refrigerator:
1. Unplug refrigerator or disconnect power.
2. Remove all removable parts from inside, such as shelves,
crispers, etc.
2O