Kenmore 106.5478 Use & Care Manual page 12

Adjusting theControls
To adjust the set points, press and hold the TEMP button for
3 seconds. When adjust mode is activated, set points and adjusting
information will appear on the display screen.
RECOMMENDED [dF] FREEZER REFRIGERATOR [37_F)
RECOMMENDED
rl°F
-I -| °F
u =| I
I v I ^
OFOC
v I ^ I u°its
NOTE: To view Celsius temperatures, press the UNITS button when
adjust mode is activated. To return the display setting to Fahrenheit,
press UNITS again.
Refrigerator Controls
When adjust mode is activated, the fourth and fifth buttons (from
the left) adjust the refrigerator compartment temperature. The set
point range for the refrigerator is 33°F to 45°F (0°C to 7°C).
• Press the fourth button (down arrow) to lower the set point.
• Press the fifth button (up arrow) to raise the set point.
Freezer Controls
When adjust mode is activated, the second and third buttons (from
the left) adjust the freezer compartment temperature. The set point
range for the freezer is -5°F to 5°F (-21°C to -15°C).
• Press the second button (down arrow) to lower the set point.
• Press the third button (up arrow) to raise the set point.
CONDITION: TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR Setting
1° higher
REFRIGERATOR too warm REFRIGERATOR Setting
1° lower
FREEZER too cold FREEZER Setting
1° higher
FREEZER too warm/too little ice FREEZER Setting
1° lower
Press RETURN to exit adjust mode, or allow about 15 seconds of
inactivity and adjust mode will turn off automatically.
The Accelerated Ice setting will remain on for 24 hours unless
manually turned off. The display will continue to show your
normal temperature set point.
NOTE: If increased ice production is desired at all times, change
the freezer control to a lower setting. Setting the freezer to a
colder temperature may make some foods, such as ice cream,
harder.
SmartSense
TM
Temperature Management
The SmartSense
TM
feature assists with regulating the temperature
inside the refrigerator and freezer. If a large quantity of warm food
is placed in the refrigerator or warm air enters the refrigerator
while the door is held open, SmartSense
TM
activates to quickly
restore the temperature to the set point.
smartsense
NOTE: SmartSense
TM
is always on when your refrigerator is
operating. You do not need to press any buttons to activate it. The
SmartSense
TM
icon on the dispenser display screen indicates that
the feature is functioning properly.
Temperature Display Always On
This feature keeps the temperature display on at all times.
• Press and hold TEMP and LOCI( at the same time for 3 seconds
to turn the feature on.
IMPORTANT: To avoid unintentionally locking the dispenser or
changing other settings, be sure to press both buttons at exactly
the same time.
• Press and hold TEMP and LOCI( at the same time for 3 seconds
again to turn the feature off.
Door Ajar Alarm
The Door Ajar Alarm feature sounds an alarm when the refrigerator
or freezer door is open for 5 minutes and the product cooling is
turned on. The alarm will repeat every 2 minutes. Close both doors
to turn it off. The feature then resets and will reactivate when either
door is left open again for 5 minutes.
Disabling Sounds
• To turn off all dispenser and control sounds, including the Door
Ajar Alarm, press and hold TEMP and UNITS at the same time
for 3 seconds.
IMPORTANT: To avoid unintentionally changing other settings,
be sure to press both buttons at exactly the same time.
To turn all sounds back on, press and hold TEMP and UNITS at
the same time for 3 seconds again.
Additional Features
Accelerated Ice Production
The Accelerated Ice feature assists with temporary periods of
heavy ice usage by increasing ice production over a 24-hour
period.
• Press the ACCELER ICE button to turn on the feature. The
display screen indicates whether the feature is on or off.
ON OFF
W{_te_" _;_ndce D spense_s
(o/_s s,_i;_memodes}
Depending on your model, you may have one or more of the
following options: the ability to select shaved, crushed or cubed ice;
a special light that turns on when you use the dispenser; or a lock
option to avoid unintentional dispensing.
IMPORTANT: After connecting the refrigerator to a water source or
replacing the water filter, flush the water system. Use a sturdy
container to depress and hold the water dispenser lever for
5 seconds, then release it for 5 seconds. Repeat until water begins
to flow. Once water begins to flow, continue depressing and
releasing the dispenser lever (5 seconds on, 5 seconds off) until a
total of 3 gal. (12 L) has been dispensed. This will flush air from the
filter and water dispensing system, and prepare the water filter for
use. Additional flushing may be required in some households. As air
is cleared from the system, water may spurt out of the dispenser.
12