Vacuum Cleaner; Handle; Packing List - Kenmore 116.31200 Use & Care Manual

Please
pay special attention to these hazard alert boxes, and follow any instruc-
_ tions given. WARNING statements alert you to such hazards as fire, electric
shock, burns and personal injury. CAUTION statements alert you to suchhazards
as personal injury and/or property damage.
WARNING
Electrical Shock Hazard
DO NOT plug into the electrical supply
until the assembly is complete. Failure
to do so could result in electrlcal shock
or injury.
Before assembling the vacuum cleaner,
check the PACKING LIST. (Page 3) Use this
list to verify that you have received all the
components of your new Kenmore
vacuum cleaner.
HANDLE
,_CAUTION
Do not overtighten.
Overtlghtening could strip the screw
holes.
Do not operate the vacuum cleaner with=
out the screw in place.
1. Remove the handle screw from the
body of the vacuum cleaner.
Hose
Holder
Handle
Screw
Hole
2. Position the handle assembly as shown
in the illustration. Insert handle screw.
3. Using a Phillips screwdriver, tighten Hond,e __
handle
screw. Screw _ ___,
NOTE: It may be necessary to adjust the _1_. _
handle slightly. _
=7=