Kenmore 116.31200 Use & Care Manual page 16

WARNING
Electrical Shock And Personal Injury Haz-
ard
Disconnectelectrical supply before per-
forming maintenance to the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
vacuum cleaner suddenly starting.
4. AGITATOR OVERLOAD
PROTECTOR
The agitator has built-in protection
against motor damage should the
agitator jam. If the agitator slows down
or stops, the agitator overload protector
shuts off the agitator motors. The vacuum
cleaner suction motor will continue to run.
To correct problem: Turn off and unplug
vacuum cleaner, remove obstruction, then
press AGITATOR RESETBUTTON.
NOTE: Once the agitator motor shuts
down, clear jam from agitator and
wait a minimum of 20 seconds before
resetting overload protector.
If the problem persists, have the vacuum
cleaner serviced by a Sears or other
qualified technician.
DIRT SENSOR
The electronic dirt sensor is a feature
which will detect particles as they pass
through the vacuum cleaner.
The dirt sensor indicators are located on
the nozzle of the vacuum cleaner.
* When little or no dirt is present the
dirt sensor is green.
* With medium or heavy concentration
the dirt sensor is red.
OPERATION
As you vacuum, the red indicator light
will come on and stay on as long as the
sensor detects a high concentration of
particles passing through the vacuum
cleaner.
a 16 a