Clearing Memories - Furuno GP-1850F Operator's Manual

Remote controller test
This test checks the controls of the remote
controller for proper operation.
1. Press the [MENU] key followed by the soft
keys CONFIGURATION, SYSTEM
MENU and SELF TEST to display the self
test menu.
2. Press the soft key REMOTE CONTROL-
LER TEST to display the screen for test-
ing the remote controller.
Figure 13-7 Remote controller test
3. Press the any key. The pressed key's on-
screen location turns black if the key is
functioning properly.
4. To escape, press the soft key RETURN
on the display unit, or press the [CLEAR]
key three times on the remote controller.
13-6

13.6 Clearing Memories

The memory, which stores marks, tracks and
initial settings, can be cleared to start afresh.
When this done all default settings are re-
stored.
1. Press the [MENU] key followed by the soft
2. Press the soft key MEMORY/TRIP
REMOTE
TEST
PRESS
"CLEAR" KEY
3 TIMES
TO RETURN.
3. Press
4. Press the soft key EDIT.
RETURN
5. Press
6. Press the soft key ENTER or the [ENTER]
Note: For CLEAR PLOTTER MEMORY and
CLEAR ALL MEMORY, all waypoints and
routes are cleared and default settings are
restored. If you require this data, save it to a
PC.
keys CONFIGURATION and SYSTEM
MENU.
CLEAR to open the clear memory menu.
CLEAR PLOTTER MEMORY
s
CLEAR GPS MEMORY
CLEAR ALL MEMORY
TRIP METER RESET
DGPS 3D
Figure 13-8 Clear memory menu
or to select memory/trip to
clear.
to select YES.
key to clear memory/trip selected.
CLEAR
MEMORY
NO
EDIT
NO
NO
NO
RETURN