3.
CHANGING SETTINGS
This chapter provides the information necessary for changing equipment settings. For
details about specific dialog boxes, see the table below.
Record
External output, calibration, comm. settings, date
3.1
Mode Dialog Box
The Mode dialog box lets you choose an A-scope format and the displays to show. The
procedure below describes how to choose what settings to display on the User1-User3
displays.
1. Click Disp.
2. Click Mode.
3. In the Display Mode window, enable User1, User2 or User3 as appropriate.
See para.;
2.1
2.2.1
1.21
2.2.2, 2.2.3
1.18
Installation manual
2.2.4
Mode dialog box
3-1