Kenmore 116.21714 Use & Care Manual page 16

COMBINATION BRUSH
The combination brush uses two tools, the
dusting brush and the pet toot. Each is for
use on various surfaces. See ATTACHMENT
USE TABLE (page 17).
To remove dusting J- Holder
brush or pet tool, BDrUuSst Ln g f
release by ___!-Tab
pressing tab and
lifting off the
holder,
Tab-
To attache insert
$1et-_ tab on holder
into slot on
1 dusting brush or
Pet pet tool and
press until tab
snaps _nto place,
When stored, the brush shield can be slid
over the brush.
Shield
CREVICE TOOL
To attach the crevice tool to the handle:
1. Place the
round end of
the crevice tool
onto the tab on
the handle as
shown.
2. Align the slot On the flat end of crevice
tool wffh the tab on the handle.
3. Pressthe crevice tool onto the handle
until the crevice tool snaps into place.
Tab l
16