HP 54600B User's And Service Manual page 3

General-Purpose Oscilloscopes
The HP 54600B-Series Oscilloscopes offer exceptional waveform
viewing and measurements in a small, lightweight package. The
two-channel HP 54600B and HP 54603B are suited for production,
field service, and education applications. The four-channel
HP 54601B is best suited for research and design labs, and
applications involving digital circuit test and troubleshooting. For
higher frequency applications, the HP 54602B provides 150 MHz
bandwidth and triggering up to 250 MHz. Each of these oscilloscopes
gives you:
60-MHz bandwidth (HP 54603B)
100-MHz bandwidth (HP 54600B and HP 54601B)
150-MHz bandwidth (HP 54602B)
Automatic setup of the front panel
Automatic and cursor measurements of frequency, time, and voltage
Waveform storage
Save and recall of 16 front-panel setups
Peak detect
These oscilloscopes are easy to use with familiar controls and high
display update rate, but with none of the viewing problems that are
associated with analog oscilloscopes. A bright, crisp display is
obtained at all sweep speeds and delayed sweep magnifications.
Storage is as simple as pressing a button. Negative time allows the
viewing of events that occur before the trigger event. Cursors and
automatic measurements greatly simplify the analysis of these events.
You can upgrade this oscilloscope for hardcopy or remote control with
the addition of an interface module. Unattended waveform
monitoring and additional waveform math, such as FFT, can be added
with the addition of one of the Measurement/Storage modules.
ii