To Make Voltage Measurements Automatically - HP 54600B User's And Service Manual

To make voltage measurements automatically

You can measure the following voltage parameters automatically with the
oscilloscope: peak-to-peak, average, rms, maximum, minimum, top, and base.
The following exercise guides you through the Voltage keys by making an
rms voltage measurement. Figures 2-8 and 2-9 show pulses with some of the
voltage measurement points.
Figure 2–8
Pulse where the top and bottom are well-defined
Figure 2–9
Pulse where the top and bottom are not well-defined
Operating Your Oscilloscope
To make voltage measurements automatically
2–19