Overcasting Stitch [] - Kenmore 19502 Owner's Manual

= Overcasting Stitch []
f
Set the Machine
3E3E3
C, Overedge foot
Thread tension
2to 5
The Stitch and Its Uses
This zigzag variation is very useful in
garment construction and in finishing raw
edges of any sewing project.
Here's How
1, The black ridge and brush and the
guide wires on the overedge foot keep
the edge neat and the fabric straight.
2. Place your fabric so that the double
guide wires come to the edge,
ridge and
brush guide
NOTE: These wires keep light weight
fabric from rolling into a
ridge and hold medium
weight fabric flat.
The machine wilt stitch over these
wires. The black ridge and brush will
keep the loose threads in so that the
needle can stitch over them.
For overcasting folded fabric:
You can a]so fold the raw edge of the
seam and overcast.
1. Start the fold by sliding it under
the needle and lowering the
needle,
NOTE: Be sure your needle is in the
3_
4.
As you sew, be sure your fabric
edge pushes against the black
ridge and brush guide,
When you stop sewing, remove
the fabric by drawing it to the
back and out, The fabric wilt
catch on the w_re guides if you
pull it toward you,
left position.
2. Lower the presser foot so that
both guide wires are on the fabric,
3. Fold the fabric to the left 1/8"
as you feed it into the machine
and stltch.
Hetpfui Hints
Start overcasting about 1/8" inside the raw corner of your seam. If you start
right at the edge, the fabric will bunch up and the stitches will become tangled.
61