Figure 27. Removing the Memory Cover Screws
T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK
IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY CAPACITY
Removing a Memory Upgrade Module
Perform steps 1 through 4 of Installing a Memory Upgrade Module.
1
Pull the clips sideways away from each side of the memory upgrade module at the same time.
2
While holding the clips out, remove the module from the slot by lifting it up and pulling it away from your
3
notebook. (Figure 30)
Store the memory upgrade module in a static guarded sleeve.
4
Replace the cover and reinstall the screws.
5
Memory Cover
Figure 28. Opening the Memory Compartment
.
55 - Memory Upgrade Module
. O
,
NCE IT IS INSTALLED
YOU SHOULD LEAVE IT