Fujitsu LIFEBOOK LH532 User Manual page 111

Program
An integrated set of coded commands to your computers telling your hardware what to do and how and when to do it.
Protocol
Procedures and rules use to send and receive data between computers.
It is also a method of sending and receiving data and a process used to handle communication errors
Conditions required for communication are organized in procedures for correct transfer of information.
RAM
Random Access Memory. A hardware component of your LIFEBOOK notebook that holds binary information (both
program and data) as long as it has the proper power applied to it.
RAM Module
A printed circuit card with memory and associated circuitry which allows the user to add additional memory to the
computer without special tools.
Reset/Restart
The act of reloading the operating system. A reset erases all information stored in RAM.
Resume
To proceed after interruption. In your notebook this refers to returning to active operation after having been in one
of the suspension states.
ROM
Read Only Memory. A form of memory in which information is stored by physically altering the material. Data stored
in this way can not be changed by your notebook and does not require power to maintain it.
SDRAM
Synchronous Dynamic Random Access Memory.
105 -