Fujitsu LIFEBOOK LH532 User Manual page 76

Problem
The display has bright or dark
spots.
The application display uses
only a portion of your screen
and is surrounded by a dark
frame.
The Display is dark when on
battery power.
You have connected an exter-
nal monitor and it does not
display any information.
You have connected an exter-
nal monitor and it does not
come on.
Connectivity Problems
You are attempting to con-
nect to the Internet, but you
do not appear to have power
to the WLAN.
Miscellaneous Problems
Error message is displayed on
the screen during the opera-
tion of an application.
Possible Cause
If the spots are tiny and few, this
is normal for a large LCD display.
If the spots are numerous or
large enough to interfere with
your operation needs.
An application is running that
doesn't support the system's
native resolution and display
compression is enabled.
Power Management default is
set on low to conserve power.
Your external monitor is not
properly installed.
Your operating system is not
setup with the correct software
driver for that device.
Your external monitor is not
compatible with your LIFEBOOK
notebook.
The wireless device functions
have been turned off.
Application software often has
its own set of error message dis-
plays.
Possible Solutions
This is normal; do nothing.
Display is faulty; contact your support representative.
Display compression gives a clearer but smaller display for applications that do not
support the system's native pixel resolution. You can fill the screen but have less
resolution by changing display compression settings. These settings can be
changed in the Intel GMA control panel.
Press [Fn] + [F7] to increase brightness or double-click on the battery gauge and
adjust Power Control under battery settings.
See "Anytime USB Charge Utility" on page 59.
Reinstall your device.
Check your device and operating system documentation and activate the proper
driver.
See your monitor documentation and the External Monitor Support portions of the
Specifications section. See "Specifications" on page 88.
To activate the wireless LAN devices, press the [Fn] and [F5] keys at the same time.
When active, the wireless LAN indicator in the status indicator panel will glow. To
turn the devices off, repeat the same step.
See your application manual and help displays screens for more information. Not
all messages are errors some may simply be status.
70 - Troubleshooting