Door Lock; Cancelling The Programme - Fisher & Paykel WH60F60W Series Installation Instructions And User Manual

Selecting a programme and operating your machine
Changing the selections after the programme has started
Turning the programme knob while the programme is in operation will not change the
■ ■
programme.
The programme needs to be paused or cancelled before changes can be made.
■ ■

Door lock

The loading door cannot be opened whilst the READY lamp is flashing due to safety reasons.
■ ■
Once the READY lamp lights continuously the door is able to be opened.
■ ■
Adding additional laundry
Press the START/PAUSE button to pause the programme.
If the water level does not exceed the preset limits, in 1 to 2 minutes the door lock will be
■ ■
deactivated. Laundry may be added / taken out by opening the door.
If, after 2 minutes, the door is unable to be opened, it means that the water level inside
■ ■
the machine is too high for the door to be opened and laundry added (refer to 'Cancelling
the programme').
Pausing the programme
Press START/PAUSE button momentarily to switch your machine to the standby mode.
■ ■
Additional functions can be cancelled or selected according to the stage of cycle the current
■ ■
programme is at.

Cancelling the programme

If the programme has started and you want to cancel it:
Press and hold the START/PAUSE button for 3 seconds.
1
The programme will progress to the SPIN step.
2
The water will be drained, and after 1 –2 minutes the door can be opened.
3
Note: the READY warning lamp flashes during cancelling and then END will appear on the display.
15