Rgb Adjustment; Brilliance Adjustment - Furuno MU-150C Operator's Manual

3.2 RGB Adjustment

Color may be adjusted with the following potentiometers. Turn the potentiometers clockwise
to increase color.
Model
FCV-1200 Series, CH-250,
FR-1760DS
GD/GP-280/380/680, FCV-1500
Series, CH-37, CSH23/73/83,
FR-1500 MK3 Series
R1: Red
R2: Green
R3: Blue

3.3 Brilliance Adjustment

Brilliance can be adjusted from the control unit of the FCV-1200 series or CH-250 by setting
jumper block J17 as below.
J17: Brilliance control circuit selection
1-2: Brilliance is adjusted from the MU-150C (default setting)
2-3: Brilliance is adjusted from the control unit of the FCV-1200 series or CH-250
Note: Do not change the setting of the J16 or J18. The default setting for both is "1-2".
S1
J16
1 3 1
Default setting
Fully clockwise
S2 S3 S4
R1
R2
J17 J18
3 1 3
R3
Jumper blocks
Potentiometer Setting
J16 EXTBRILL
J17 BRILL
J18 BRTP
R1 R
R2 G
R3 B
12
S1 SEL
S2 UP
S3 DOWN
S4 RESET