Furuno MU-150C Operator's Manual page 15

Connecting FCV-1200 series and CH-250
Using the cables designated below (or equivalent) to connect the FCV-1200 series or
CH-250 makes their interface unit of the FCV-1200 series and CH-250 unnecessary. The
mini D-SUB 15 P connector cannot be used to connect the FCV-1200 series and CH-250.
Notes on wiring
For AC specification, solder connector SRCN6A13-3S (supplied in installation materials)
to the power cable (DPYC-1.5 (Japan Industrial Standard) or equivalent).
How to solder connector SRCN6A13-3S; sectional view of cable DPYC-1.5
The cover of the D-sub connector of the cable 06S4078 may be removed to pass the
cable through tubing, bulkhead, etc. Use vinyl tape to bind connector wiring and rubber
cover. This allows the cable to be passed through a hole having a diameter of 30 mm.
Display unit, rear view, wiring using specialty cables
8
B