Ssh Commands; Scp Protocol Support - Avaya P334T-ML Installation And Configuration Manual

Figure 8.1
Device Dom ain

SSH Commands

The following SSH commands are accessible from Supervisor level.
In order to...
Enable SSH and configure SSH
parameters
Disable the SSH server
Display active SSH sessions on the
device. This command is only
available from the master module
switch context and from all router
contexts.
Disconnect an existing SSH session.
If an SSH session was entered from
the router, it can only be
disconnected from router mode.
Generate an SSH host key pair

SCP Protocol Support

In addition to data transfer via an SSH session, the SSH protocol is also used to
support SCP for secure file transfer. When using SCP, the P330 is the client, and an
Avaya P334T-ML User's Guide
SSH Session Establishment Process
SSH Client Connection
Establish Connection
Public Key and Encryptions List
Private Key and Encryptions List
Acknow ledgment (ACK)
SSH Server
Username
User Authentication
List
Host RSA User Passw ords
key
Initiate CLI Session
Chapter 8
Host Dom ain
SSH Client
Hostnames
List
Use the following command...
ip ssh enable
no ip ssh
show ip ssh
disconnect ssh
crypto key generate dsa
User Authentication
47