Netbios Re-Broadcast Configuration; Netbios Overview; Netbios Re-Broadcast Configuration Cli Commands - Avaya P334T-ML Installation And Configuration Manual

NetBIOS Re-broadcast Configuration

NetBIOS Overview

Short for Network Basic Input Output System, an application programming
interface (API) that augments the DOS BIOS by adding special functions for local-
area networks (LANs). Almost all LANs for PCs are based on the NetBIOS. Some
LAN manufacturers have even extended it, adding additional network capabilities.
The Avaya P330 can be configured to relay netbios UDP broadcast packets. This
feature is used for applications such as WINS that use broadcast but may need to
communicate with stations on other subnets or VLANs.
Configuration is performed on a per-interface basis. When a netbios broadcast
packet arrives from an interface on which netbios rebroadcast is enabled, the packet
is distributed to all other interfaces configured to rebroadcast netbios.
If the netbios packet is a net-directed broadcast (e.g., 149.49.255.255), the packet is
relayed to all other interfaces on the list, and the IP destination of the packet is
replaced by the appropriate interface broadcast address.
If the netbios broadcast packet is a limited broadcast (e.g., 255.255.255.255), it is
relayed to all VLANs on which there are netbios-enabled interfaces. In that case, the
destination IP address remains the limited broadcast address.

NetBIOS Re-broadcast Configuration CLI Commands

In order to...
Set NetBIOS rebroadcasts mode on
an interface
Disable NetBIOS rebroadcasts
mode on an interface
Avaya P334T-ML User's Guide
Chapter 12 Avaya P330 Layer 3 Features
Use the following command...
ip netbios-rebroadcast
no ip netbios-rebroadcast
141