Main Switch Operation Procedure - Hotpoint HP21WC-Cooling Only Operating Instructions Manual

Main switch operation procedure

1.Only Cooling
1.Main Control Knob
Set to Low Cool,Med Cool or High Cool as desired (FAN setting operates the fan only.)
CAUTION:If the main control knob is turned off of changed to a fan setting from a cooling operation setting.
WAIT at teast 3minutes before resetting to cooling operation.
2.Thermostat control Knob
Set the thermostat control knob to your desired setting(Usually 6-7 is recommended),If the room temperature is
not as desired after a reasonable period,turn the thermostat.When the thermostat control knob is set to 10moisture
may freeze onto the evaporator fins by turning the thermostat control knob counter clockwise,This will quickly defrost the
evaporator fins so that normal cooling can be resumed.
2.Cooling and Heating
1.Main Control Knob
Set either Low Cooling or High Cooling and Low Heating or High Heating as desired.
(FAN setting operates the fan only.)
CAUTION:If the main control knob is turned off or changed to a fan setting from a cooling operation setting.
WAIT at teast 3minutes before resetting to cooling operation.
2.Thermostat control K nob
Set the thermostat control knob to your desired setting(Usually 4-5 is recommended setting for setting for heating
and 6-7 for cooling),If the room temperature is not as desired after a reasonable period,turn the thermostat.When
the thermostat control know is set to 10moisture may freeze onto evaporator fins by turning the thermostat control knob
counter clockwise,This will quickly defrost the evaporator fins so that normal cooling can be resumed.
7