Toshiba B-EX Series Operation Manual page 9

5.
The [Selection of Initial Setting] screen appears.
Select a language used for the Product, a printer
model to be connected and its destination from the pull
down menus.
These are changeable after installation.
6.
The [Start Copying Files] screen appears.
Check the descriptions under [Current Settings] and
click [Next] when the descriptions are correct. Then,
the installation starts.
When you want to change the setting, click [Back] until
the applicable screen appears, then make the change.
7.
The installation is being performed.
Click [Cancel] to stop the installation.
8.
The [InstallShield Wizard Complete] screen appears
when the installation is completed.
Click [Finish] to complete the operation.
6