Replacing The Microfilter; Troubleshooting - Samsung VAC-9073R Operating Lnstructions

The motor filter protects the motor from dirt and ensures long-lasting and efficient operation.
When the filter becomes dirty, wash it in warm water, dry it thoroughly, and position it in place.
• The microfilter filters the air which comes out from the vacuum cleaner.
• To open the filter cover, press down and pull it simultaneously.
• Remove and replace the dirty microfilter.
• Close the cover.
PROBLEM
Motor does not start
Suction force is
gradually reduced
Cord does not rewind
fully
CARE OF MOTOR FILTER

REPLACING THE MICROFILTER

CAUSE
No voltage
Filter,nozzle,suction
hose tube blocked, or
bag full.
Check that the cord is
not twisted or wound
unevenly
EN -8

TROUBLESHOOTING

REMEDY
Check cable, plug and
socket.
Remove the obstruction or
replace bag.
Pull the cord out 6~10ft &
push down the cord rewind
button