Maintaining The Power Brush - Samsung VAC-9073R Operating Lnstructions

VACUUMING WITH THE POWER BRUSH
1. Attaching the Power Brush
The hose must be plugged into the canister and the power brush
must be plugged into the hose and extension wand (see page 3).
2. Vacuuming
For best results, move the power brush slowly using short,
overlapping strokes.
For heavily soiled areas, repeat strokes in several directions.
Turn height adjustment knob to match the surface being cleaned.
CAUTION:
Do not invert the power brush while it is running
3. Checking the Performance of the Power Brush
You may check whether the power brush is operating correctly by lifting up the extension tube slightly
to view the back of the brush.
The Power Brush will not operate when it is jammed or the unit is turned off.
If the Power Brush is jammed, Unplug the power cord from the electrical outlet. Turn the power brush over
and remove the jammed object.
Turn the power brush back to vacuuming position and resume vacuuming.
1. Removing the Brush Cover
Before replacing any parts, unplug the vacuum
cleaner from the electrical outlet.
Remove 6 screws from the bottom plate and
open the brush cover.
2. Replacing the Headlight Bulb(optional)
1) Remove the Brush Cover as
described below.

MAINTAINING THE POWER BRUSH

EN -6
2) Remove the old bulb from the bulb socket.
Insert the new bulb. You can use a vacuum
cleaner lamp rated 120V, 20W.