Extension Wand; Power Cord - Samsung VAC-9073R Operating Lnstructions

ASSEMBLING THE VACUUM CLEANER FOR USE
Attaching the Hose to the Canister
Slide the Hose Clamper into the canister Inlet until it
"Clicks" into place.(Fig. A-A)
Attaching the Extension Wand to the Hose
Slide the handle end of hose over the end of the wand
until it "Clicks" into place. (Fig. A-B)
They can be removed by pressing the button on the
Hose.
Attaching the Power Brush
Slide the end of the Extension Wand onto the Power
Brush Wand unitl it "Clicks" into place. (Fig. A-C)
They can be removed by pressing the button on the

Extension Wand.

EXTENSION WAND
The Extension wand can be adjusted to your height.
Hold the central area with one hand while pulling the
smallest tube out or pushing into the desired length with
the other hand.

POWER CORD

1) PULLING OUT
The power cord is long enough to be drawn out for
convenience.
2) REWINDING
Upon finishing cleaning, disconnect the plug from the electrical
outlet and press the cord rewind button lightly with your toe.
NOTE :
When removing the power cord from the electrical outlet, grasp the plug, not the cord.
EN -3