Mailing Service; Event Setting - Samsung SRD-852D User Manual

using the DVR

Mailing Service

You can send an e-mail to a DVR-registered user at a specifi c time interval, or if an event occurs.

M
If an event occurs with a channel where the camera's video is set to <OFF> or the remaining recording count is set
to <OFF>, only the text notifi cation will be sent to the applicable email address.
SMTP Setting
Sets the SMTP mail server.
Using the mouse may help make setup easier.
1. In the <Network> setting window, press the up/down
( ) button to move to <Mailing Service> and press the
[ENTER] button.
2. Select <SMTP>.
You will see the SMTP setting window.
Use direction buttons ( ◄ ►) to move to a desired item
3.
and set the value.
•
ServerType : Displays the connected server type.
•
Server : Enter a server to connect to.
•
Port : Sets the communication port.
•
Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
•
User : Enter a user to use authentication when connecting to the SMTP server.
•
Password : Enter the password of the SMTP server user.
•
Secure Transfer : Select one from <Never> and <TLS (if available)>.
•
Sender : Use the virtual keyboard to enter the sender's e-mail address.

Refer to "Using Virtual Keyboard". (Page 36)
•
TEST : Conducts the test on the server settings.
4. When the SMTP setting is done, press <OK>.

Event Setting

You can set the interval and type of the event that will be sent to the user.
Using the mouse may help make setup easier.
1. In the <Network> setting window, press the up/down
( ) button to move to <Mailing Service> and press the
[ENTER] button.
2. Select <Event>.
Use direction buttons ( ◄ ►) to move to a desired item
3.
and set the value.
•
Event Interval : Set the event interval.

If a series of events occurs, the e-mail will be sent at the specifi ed
interval, not on each event.
•
Use Event Transfer : Select an event type to send if an event occurs.
If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.
4. When the event setting is done, press <OK>.
64_ using the DVR
Mailing Service
SMTP
Event Group
ServerType SMTP mail Server
Server
Port 25
Use Authentication
User
Password
********
Secure Transfer Never
Sender
TEST
OK Cancel
Mailing Service
Event
SMTP Group
Event Interval 10 min
Use Event Transfer
Sensor Motion
Change P/W HDD Info
Power On/Off Manual Record
OK Cancel
Recipient
ex. user@example.net
Recipient
Video Loss