using the DVR
You can setup the system properties, devices, and options for recording, event,
backup and network.
SYSTEM SETUP
You can setup Date/Time/Language, Permission, System Properties and Log.
Date/Time/Language
You can check and setup the current Date/Time and time related properties, as well as the language used for
the interface on the screen.
Setting the Date/Time/Language
Set the Date/Time/Language
Using the mouse may help make setup easier.
1.
Press the [MENU] button on the remote control or on the
front panel.
If not logged in, it prompts with login window.
Refer to "Login". (Page 24)
Use the left/right buttons (◄ ►) to select the <System>.
2.
System property setup menu is selected.
3.
Use the up/down buttons () to select <Date/Time/
Language> and press the [ENTER] button.
4.
Select <Date/Time/Language>.
A dialog to setup Date, Time and Language.
Use direction buttons (◄ ►) to select an item to set
5.
and make your changes.
•
Date : Sets the date that will appear on the screen.
You can select the date format.
•
Time : Sets the time and its format that will appear on the
screen.
Select either one from <24 Hours, 12 Hours (AM/PM)>.
•
Time Zone : Sets the time zone of your area based on the
Greenwich Mean Time (GMT).
GMT (Greenwich Mean Time) is standard World Time and the
basis of world time zone.
•
Time Sync. : You can set the DVR's current time
synchronized to a selected <Time Server> regularly if you select to use <Time Server>.
In this case, <Date/Time/Language> setup does not allow time adjustment.
34_ using the DVR
2011-01-01 01:10:25
System
Date/Time/Language
Permission Management
System Management
Log Information
Date/Time/Language
Date/Time/Language
Holiday
Date
2011-01-01
YYYY-MM-DD
Time
08:14:24
24 Hours
Time Zone
GMT
Time Sync.
Setup
DST
Dec First (Sun) 0
Dec First (Sun) 0
Language
English
OK
Cancel
Logout
Exit