Programming (continued)
Figure 8
Adjusting Temperature Settings
Press the LOCK pad to raise the temperature set point or press the MAX ICE pad to lower the
temperature set point.
See figure 8.
IMPORTANT: When the temperature is changed, the word "CONFIRM" above the filter reset
pad illuminates and will flash without an audible tone constantly until user presses RESET
FILTER, ICE MODE or after 60 seconds of inactivity. If the user presses TEMPERATURE
to change compartments, CONFIRM still flashes if one of the temps has been changed.
NOTE: To view Celsius temperatures, press the LIGHT button when adjust mode is activated.
Figure 9
Freezer Temperature Setting
After viewing (and adjusting if desired) the refrigerator set point, press TEMPERATURE to
change the display to show the freezer set point. When the zone has been changed, "FREEZ-
ER" appears on the display screen. Press LOCK to raise the set point, or press MAX ICE to
lower the set point. When you have finished viewing (and adjusting if desired) both the refrig-
erator and freezer set points, press FILTER to save the settings. See figure 9
.
5-5