Checking the auger motor
WARNING
electrical Shock Hazard
disconnect power before servicing.
replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
Unplug refrigerator or disconnect power.
Connect an Ohmmeter across the 2 motor
terminals and measure the resistance. The
resistance should be approximately 210
Ohms plus or minus 10%.
removing emitter and receiver Boards
Emitter
Freezer Components (continued)
Release 3 tabs to remove the emitter
and receiver boards from the housing.
Emitter Board
4-21
Receiver Board