Removing Auger Motor - Whirlpool GSF26C5EXW Technical Education

removing auger motor

6. Remove 4 - 1/4" screws securing the mo-
tor to the housing .
7. Lift up the auger motor and disconnect the
wire harness.
Condensate Drain
Under normal operating conditions, moisture may accumulate in the bottom of the auger motor
housing. A drain hole is provided to allow water to pass through the inner door panel and drop
onto the lower shelf, see figure 2.
Auger Motor Compartment
Freezer Components (continued)
Drain Hole
Figure 1
6
7
Auger Motor
4-20
Auger Motor
Compartment
Drain Outlet
Figure 2