Whirlpool GSF26C5EXW Technical Education page 14

Installation Instructions (continued)
Removing Freezer Door
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug or disconnect the refrigerator from
the power supply.
2. Remove the screws securing the wire
harnesses to the cabinet.
3. Disconnect water tubes form the door side
of the connector.
4. Unplug the three
wire harnesses
plugged into the
terminal board.
5. Remove strain relief from the wire harness.
This will allow the harness to pass through
the hole in the hinge.
2
2
3
4 3
5
2-6