Interpreting The Leds; The Application Does Not Recognize The Tape Drive; Backup Software Errors - Dell PowerVault 110T SDLT320 User Manual

Interpreting the LEDs
Refer to the Usage: Front Panel LED/Control Functionality
The Application Does Not Recognize the Tape Drive
Possible cause
The application does not support the tape drive.
Some applications require drivers to be loaded.
Reinstalling the Backup Software
Refer to your tape backup software documentation for details about how to reinstall the software, if necessary.
Reinstalling the Drivers for Microsoft™ Windows®
Refer to the Setup: Loading Device Drivers
Backup Software Errors
Refer to the Operating Guide supplied with your backup software for details of how to troubleshoot backup software errors.
Back to Contents Page
section for details, including a figure that shows the location and color of the three front panel LEDs.
Potential solution
Check the application's documentation for details of drives supported. Load any service packs as
necessary.
Check that the correct SCSI and tape drive drivers are installed. Consult the backup application's
installation notes for details. See
section for details.
Obtaining Drivers and Firmware Updates.