Ceiling Mounting - Straight Tube - D-Link DCS-6915 User Manual

Section 2: Assembly and Installation
Follow the steps below to mount the camera enclosure with the straight tube.
1. Ensure that the ceiling can support the weight of the camera enclosure and
straight tube.
2. Make a cable entry hole on the ceiling.
3. Affix the straight tube to the ceiling with screws and screw anchors (not
supplied).
4. Attach the waterproof collar to the straight tube.
5. Thread the cables through the straight tube and the cap.
6. Affix the cap to the straight tube with the supplied screws and washers. Attach
the waterproof collar around the junction of the straight tube and cap.
7. Connect the cables to the camera enclosure. Attach the camera enclosure to
the cap and affix it with the supplied bolt.
Note: After threading the cables, please block the cable entry hole with the
supplied sponges to prevent insects from entering the tube.
D-Link DCS-6915 User Manual

Ceiling Mounting - Straight Tube

15