Access List - D-Link DCS-6915 User Manual

20x full hd high speed dome network camera

Hide thumbs Also See for DCS-6915:

Table of Contents

Section 3: Advanced Configuration

Access List

This section explains how to control access permissions by verifying the connecting client

PC's IP address.

Enable access list filtering: Access to the IP Camera can be restricted by denying/allowing

specific IP addresses. Check the box to enable the IP Filter function. Once enabled, the listed

IP addresses (IPv4) will be allowed/denied access to the IP Camera.

Filter Type: Select (Allow) or (Deny) from the drop-down list and click on the button to

determine the IP Filter behavior.

Filter: Input the IP address and click on the button to add a new filtered address. The Filtered

IP Addresses list box shows the currently configured IP addresses. Up to 256 IP address entries

may be specified.

D-Link DCS-6915 User Manual

Table of Contents