D-Link DCS-6915 User Manual page 32

Section 3: Advanced Configuration
1. Set the White balance to Auto and click Save.
2. Place a sheet of white paper in front of the lens, then allow the camera to adjust
the color temperature automatically.
3. Select Fixed to confirm the setting while the white balance is being measured.
4. Click Save to enable the new setting.
Overlay Title and Time Stamp on Video: Select this option to place the video title
and time on the video streams. (When the frame size is set to 176 x 144 only the
time will be stamped on the video streams.)
Sharpness: Increasing the sharpness level can make the image look sharper; especially
enhancing the object's edge. The Sharpness value is adjustable from 1 to 15.
ExpComp: Users can define the value of Exposure Compensation; the value ranges
from 1 to 15.
WDR: The WDR function is especially effective in environment with extreme contrast.
2DNR: With the 2D Noise Reduction function, the processor analyzes pixel by pixel and
frame by frame to eliminate environmental noise signals so that the highest quality
image can be produced even in low light conditions.
D-Link DCS-6915 User Manual 32