Table of Contents
Advertisement
Available languages
Available languages
INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
TOOLS NEEDED:
•
Phillips screwdriver
PARTS NEEDED:
Custom Overlay Frame--See
"Overlay Frame--Rear
View."
Hardware (Optional)
PARTS SUPPLIED:
•
M4 x 14 wood screws (12)
E×plosion Hazard
Keep flammable
materials
and vapors, such as
gasoline,
away from wine cellar.
Failure to do so can result in death, explosion,
or fire.
NOTES:
•
For the wine cellar to be flush with the front of the base
cabinets remove any baseboards or moldings from the rear of
the opening. See "Product Dimensions" and later in this
section "Opening Dimensions."
•
It is recommended
that you do not install the wine cellar near
an oven, radiator, or other heat source.
•
Do not install in a location where the temperature will fall
below 55°F (13°C). For best performance,
do not install the
wine cellar behind a cabinet door or block the base grille.
I
!!
Opening Dimensions
•
Height dimensions are shown with the leveling legs extended
to the minimum height.
NOTE: When leveling legs are fully extended, add %"
(15.9 mm) to the height dimensions.
See "Product
Dimensions."
•
If the floor of the opening is not level with the kitchen floor,
shim the opening to make it level with the kitchen floor.
I
.........................
A
610'n96 ¢m)
24" (60.96 crn) min.
343/8" (87.3 cm) min.
35" (88.9 cm) max.
Critical Dimensions:
A. 14_" (37.5 cm) utility opening
B. 24" (60.96 cm) minimum opening width
Advertisement
Table of Contents
