System Agent Configuration - Asus P8H77-V Manual

3.5.4

System Agent Configuration

UEFI BIOS Utility - Advanced Mode
Main
Back Advanced\
System Agent Bridge Name
Memory Remap Feature
> Graphics Configuration
> NB PCIe Configuration
Memory Remap Feature [Enabled]
[Enabled]
[Disabled]
Graphics Configuration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [Auto] [iGFX] [PEG] [PCI]
iGPU Memory [64M]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by
the iGPU. Configuration options: [32M] [64M] [96M] [128M] ~ [448M] [480M] [512M]
[1024M]
Render Standby [Enabled]
Allows you to enable the Intel Graphics Render Standby support to reduce the iGPU
power use when idle. Configuration options: [Disabled] [Enabled]
Initiate iGPU [Enabled]
Allows you to enable or disable the Lucid Virtu support for both the integrated and
discrete graphics. The iGPU shared memory size will be fixed at 64MB. Configuration
options: [Disabled] [Enabled]
NB PCIe Configuration
Allows you to configure the NB PCI Express settings.
PCIEX16_1 Link Speed [Auto]
Allows you to configure the PCIE x16_1 speed. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]
3-18
Ai Tweaker
Advanced
System Agent Configuration >
Allow you to enable remapping the memory above 4GB.
Disables this function.
Monitor Boot
Enable or disable memory remap above
SandyBridge
4G.
Enabled
Chapter 3: BIOS setup
Tool