System Agent (Sa) Configuration - Asus RAMPAGE V EDITION 10 Manual

SATA Controller(s)
SATA Controller(s) Mode Selection
This item allows you to set the SATA configuration.
[Disabled] Disable the SATA function.
[IDE] Use SATA hard disk as Parallel ATA storage devices
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI
(Advanced Host Controller Interface). The AHCI allows the onboard storage
driver to enable advanced Serial ATA features that increases storage
performance on random workloads by allowing the drive to internally
optimize the order of commands.
[RAID] Set to [RAID] when you want to create a RAID configuration from the SATA
hard disk drives.
SATA6G_1(Gray) - SATA6G_10(Gray)
SATA6G_7(Gray) - SATA6G_10(Gray)
This item allows you to enable or disable the selected SATA port.
Configuration options: [Disabled] [Enabled]
Hot Plug
These items appear only when the SATA Mode Selection is set to [AHCI] and allows
you to enable or disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
3.6.4

System Agent (SA) Configuration

ASUS RAMPAGE V EDITION 10 3-21