Minolta CF3102 User Manual page 99

5
5
Turn misfeed-clearing dial
clockwise until the removal
indicator is completely blue.
❍ If the dial is turned too far, turn
it counterclockwise to adjust it.
Note
Be sure to perform these
steps. If the paper is pulled out
with too much force without
performing these steps, the
finisher may be damaged.
6
Open the upper door of the
finisher, and then pull out any
paper in the feed section.
7
Close the upper door.
8
Pull out any paper fed into the
output tray.
5-32
5.4 When the Message "Paper jam at Jx" Appears
CF2002/CF3102