Monitoring Operations - Sanyo CHDXR09663* Service Manual

4. Monitoring Operations

Display the indoor unit and outdoor unit sensor
temperatures.
<Operating procedure>
Press and hold the
buttons simultaneously for 4 seconds or longer to
engage temperature monitor mode.
During temperature monitoring,
(The display and operations are the same as
for monitor mode using the indoor unit remote
controller.)
Press the button and select the indoor unit
to monitor.
Press the temperature setting
buttons and select the item code of the temperature
to monitor.
The unit No. of the selected indoor unit, and the
temperature data, are displayed.
To end monitoring, press the
The display returns to the normal display.
NOTE The display does not blink.
(CHECK) button and
is illuminates.
and
(CHECK) button.
Outdoor Unit Maintenance Remote Controller
4
1
3 - 9
W-2WAY ECO-i SYSTEM
3
2
3