9. Demand Control
Serial-parallel I/O must be connected in order to perform demand control. The below input is received by serial-
parallel I/O, and demand control is performed.
The demand values can be set as needed with this device. For more information, refer to the field application func-
tions.
Demand setting
Contact 1 Contact 2
1
:
Input present
* The rated current indicates the current value that is listed in the catalog or similar material.
Control
No control
Operates to the upper limit for the rated current.
Operates to 70% of the upper limit for the rated current.
Always in stop condition.
:
Input not present
Demand meaning
Operates to maximum capacity.
1 - 20
W-2WAY ECO-i SYSTEM
Control Functions
-
-
-